Description

this room and system is the result of 10 years in High End audio. my system has been stable for a couple of years (except for transport and amplifier upgrades within the same brand). the room has been in the planning stage for about 18 months and i actually moved in a little over a month ago.

my audio philosphy is to have the system get out of the way of the event. i like as pure and simple a signal path as possible and, at this point, prefer passive to active gain stages. i love all the formats and enjoy having lot's of music.....vinyl is my favorite but i listen to at least 60% digital. the new room really reveals the benefits of SACD over redbook.

the system and room truely allow the event to be recreated before me. i love the way the speakers disappear and i am transported to another place/time.

i have choosen my cables, sources, amps, speakers to have as little of their own sound as possible.

recently, i upgraded my digtial transport from the modified Philips SACD 1000 to the new emmlabs CDSD.....this was a significant step upward in performance.

i have written an article in Positive Feedback regarding my room building experience.....here is a link;

http://www.positive-feedback.com/Issue16/lavigneroom.htm
Read more...

Room Details

Dimensions: 29’ × 21’  X large
Ceiling: 11’


Components Toggle details

    • Evolution Acoustics MM7's
    twin towers, main tower, 82
    • darTZeel NHB-468
    Mono block Amplifiers. 

    traded in my 458 amplifiers for the new version, the 468.
    • darTZeel NHB-18NS with 2 internal phono stages.
    battery powered preamp with 2 separate phono stages. uses BNC 'zeel' cables between pre and amps.
    • Evolution Acoustics 7.5 meter 'Zeel'
    7.5 meter pair of BNC cables from preamp to amps.
    • Evolution Acoustics 'System' speaker cables--10 feet
    new version of these cables, a big step over the amazing TRSC model i have used for 10 years. fantastic performance.
    • WADAX SA Reference DAC
    Wadax Reference Dac----state of the art dac with 2 separate power supplies. the best dac i have heard by a good margin. below is a link to a thread about my Wadax experience.

    https://www.whatsbestforum.com/threads/wadax-reference-dac-and-server-arrive.34173/#post-771357
    • WADAX SA Reference Server with Akasa optical interface
    ultimate state of the art music server using Roon. includes the Akasa optical interface.
    • CS Port LFT1 turntable w/arm
    air bearing platter and air bearing linear tracking arm; string drive with zero feedback dc motor, low pressure, low flow air system with zero noise air box.

    world class musical flow, nuance and delicacy, combined with authority and ease. serves the music completely.
    • Esoteric T1 Turntable
    magnetic drive/rim drive idler turntable with torque adjustment.

    https://www.esoteric.jp/en/product/t1/top
    • Esoteric G1X Master Clock
    Master Clock Generator for speed improvement for the T1 turntable.

    https://www.esoteric.jp/en/product/g1x/top
    • Wave Kinetics NVS
    direct drive turntable
    • Durand ---Two Tosca tonearms.
    gimbal bearing design. the finest tonearm i have heard.

    one Tosca on the Esoteric T1 turntable

    one Tosca on the Wave Kinetics NVS turntable
    • Primary Control 12" FCL tone arm
    Field Coil Loaded uni-pivot tone arm. with power supply.

    amazing natural and very high resolution tone arm. link below.

    https://www.primarycontrol.nl/Field_Coil_Loaded_Unipivot_Tonearm.html
    • Durand Tonearms 12" Telos, wood arm wand
    12" tone arm, uni pivot.
    • Experience Music/Intact Audio phono corrector + silver wound MC Trio SUT combo for three different tonearms.
    bespoke tubed phono preamplifier. silver wound, with custom dual power supplies.

    https://myemia.com/LR.html
    • LFD -3- Phono Cables DIN to RCA
    3 sets of very high performance phono cables. amazing performance. built by Dr. Richard Bews in the UK.

    one cable uses a DIN to RCA short Dongle + an RCA to RCA interconnect. the Dongle improves the performance of the DIN connection. details at the link below.

    https://www.whatsbestforum.com/threads/lfd-cables-phono-and-i-c-from-the-uk-cables-as-components.31243/
    • DaVa Reference cartridge
    field coil cartridge. with tube power supply.
    • two Etsuro Golds, ---a pair of Reference MC Phono Cartridges.
    duraluminim (A7075) body, 24 carat 'Kinpaku' Gold Leaf finish, diamond cantiliver. .3mv output, 4 ohms. these are both special versions of the Etsuro Gold.

    one is mounted on the CS Port linear tracker.

    one is mounted on the Primary Control FCL arm.

    finest cartridge i have heard by a significant margin. WOW!
    • Audio Technica MC-2022 60th Anniversary cartridge
    uses the unified stylus cantilever design. which results in extreme lack of distortion and linearity. maybe the best i've heard at musical truth.

    mounted on the Durand Tosca tonearm on the NVS tt.

    https://www.audio-technica.com/en-us/at-mc2022
    • Koetsu Azule Platinum Stone Body, boron cantilever
    .3 Mv output moving coil cartridge. mounted on the Durand Telos 12" wood arm wand tone arm and NVS turntable.
    • Miyajima Labs --2--Infinity mono cartridge's.
    one Infinity cartridge has 0.7mil stylus for modern narrow groove mono pressings.

    one Infinity cartridge has 1.0 mil stylus for early wide groove mono pressings.

    https://www.miyajima-lab.com/e-mono.html
    • DS Audio Ion 001 Vinyl Ionizer
    generates positive and negative ions to remove static charge from vinyl records. i use this with my NVS turntable.

    https://ds-audio-w.biz/products/181/
    • CS Port Static Eliminator IME1 (two of them)
    An unprecedented accessory focusing on cartridge friction. It suppresses the effects of static electricity and makes records clearer.

    one is on the CS Port tt, one on the Esoteric T1 tt.

    https://www.csport.audio/products/products-ime1-en.html
    • Stage III Concepts 1.5 meter XLR set of Gorgon interconnects.
    high performance interconnects. used from the Wadax Reference dac to the darTZeel preamp.

    http://aaudioimports.com/ShowProduct.asp?hProduct=283
    • Ampex twin ATR-102----one 1/4" and one 1/2" reel to reel master recorder
    hot rodded by ATR Service Inc----Andrew Kosobutsky. significant upgrades over stock. each interfacing with hot rodded Ampex MR-70 preamps.

    https://www.whatsbestforum.com/threads/ak-hot-rodded-ampex-atr-102s-w-mr-70-preamps-replaces-my-studers.36288/
    • Kosobutsky 1.5 meter set of RCA interconnects + 8 meter set of XLR interconnects.
    1.5 meter set of RCA interconnects are used between the EMIA phono corrector and the darTZeel preamp.

    8 meter set is used between the Ampex MR 70 tape preamps and the darTZeel preamp.
    • Nordost QRT QNET network switch
    Network switch, with Nordost Qsource power supply.

    https://www.nordost.com/qrt-audio-enhancers.php
    • Synology 30 Terabyte NAS (a pair = 60 TB) music file storage
    mirroring music storage for my music files.
    • Taiko Tana (5 of them) Herzan TS-150 (2) + TS-140 (3)
    active isolation under 5 separate components: (1) the NVS turntable, (2) the MSB dac, (3) the darTZeel preamp, (4 + 5) both darTZeel mono block amplifiers. custom modifications by Taiko Audio add a linear power supply plus panzerholtz top layer + Daiza platform to provide full frequency resonance attenuation to each platform.
    • Taiko Audio Daiza isolation platform--22 used in the system
    Panzerholtz Platform with spiral cutouts reducing mid and high frequency resonance while retaining life and energy and not changing tonality.

    22 Daiza platforms in the system of various sizes under every piece of the signal path.
    • Adona Zero GTX rack---3 of them--each 4 shelf.
    all three with 27" x 21" turntable top.

    solid rack for best direct floor connection.
    • Evolution Acoustics 'system' power cables
    a new version of the TRPC model i used on my darTZeel 468 mono blocks for the last 10 years. a big step up.
    • Sablon Audio King power cord
    used on the Wadax Reference Server.

    https://www.sablonaudio.com/power
    • Absolute Fidelity power interfaces
    power cords specifically designed for either motors (tt and tape decks), amplifiers, and components. 11 in the system.
    • Tripoint Audio Troy Signature
    Grounding box for chassis grounding the darTZeel 458 mono block amplifiers + grounding the passive main towers of the Evolution Acoustics MM7 speaker system.
    • Tripoint Audio Elite
    Tripoint Elite grounding box. this does chassis grounding for my sources. it uses a a pair of Tripoint Thor SE Master Reference ground cables for my dart preamp and the MSB Select II dac. there are also 4 Signature Silver ground cables to the two arm boards of the NVS tt, the power supply of the NVS tt, and the SGM server.
    • Equi=tech 10WQ
    10kva balanced Isoltion transformer and distribution panel.
    • Furutech GTX-D NCF Rhodium duplex outlets
    10 in the system. used with 10 Furutech covers and frames. uses NCF (nano crystal formula) material to reduce noise by emitting negative ions.
    • Wave Kinetics A10 U8 decoupling footers
    8 sets-of-4 in the system for individual tuning of each piece of gear.
    • Auralex T-Fusor diffusers
    i use 20 of these. 6 each on the front side walls, and 4 each front ceiling and rear ceiling.
    • Klaudio Record Cleaning System
    automatic record cleaner
    • Acoustic Revive RL-30 mKIII CD-LP demagnatizer
    for demaging any disc.
    • Furutech DF-2 LP disc flattner
    will remove warps from Lps
    • Audiodharma Cable Cooker, Anniversary Ed.
    will cook any cables
    • Winds ALM-01 Stylus Force Gauge
    easy accurate, repeatable, measurments.
    • i-Tower by Koncept LED floor lamp
    (3) are used. best audio light ever. 2 'warm', 1 'cool'.
    • Quietrock THX 545 drywall
    specialized drywall with a 1/4" metal layer. used in my front sidewalls to establish proper room boundaries.
    • view...... what i look at...
    ...while listening. Rattlesnake Ridge.
    • Barn.... ......room is....
    ....most of the ground floor. 29' x 21' x 11'.

Comments 3389

Showing all comments by gregm.

View all comments

I used the Emitter 1 exclusive a few years ago. The 1 has lower output power than the 2 -- ~150W iirc. I don't know of any other difference. I never purchased the battery thingy which was an expensive option & added an extra, fourth!, box.
Mostly I used it on a pair of Genesis Vs, a little on B&W 800s (unsuccessful combo) or S Faber somethings; also tried a number of other spkrs.

The short version is, you MUST listen to it before purchasing; listen choosing any two, different design spkrs, and get a feel. It doesn't matter if they're not your spkrs, you will know if you like it or not.

I say listen to it even on other spkrs, because lugging it to your home for an audition isn't easy. Forget "stacking the boxes and lugging under your arm. It ain't going to happen. This is a very cumbersome and heavy product, you need space to set it up, etc...

It's also a very well made product, has a superb confidence-inspiring construction, and is very user-friendly -- plug & play really. (Once you have made space for it, placed it, set it up, plugged it in, waited for a few years until the battery charges, etc;)) It is hassle free and probably built to withstand a nuclear war. I never had any operating problems with it.

Operation: it looks very cool in the dark!
Mine had an "energy-saving" mode which also seemed to save on the sonic quality, so I didn't use it except for background music... Apparently, only part of the amp is working so, you do save on electricity.
The Emitter doesn't have an active pre section -- either that or I missed something: the "pre" part was just a relay based volume control, basically like having a passive pre. Mine also had a "direct" input which bypassed the source selector and which was supposed to sound even better. Maybe.

The overall sonic result on the Genesis was good -- but cool & uninvolved. Which is strange considering that this amp has it all: frequency extension, power, unbelievable power supply, top quality internals, good quality boards, wiring, etc. I played it on some medium sized floor-standing S Faber and the resulting sound was similar. (I also tried a host of other spkrs at home -- it was easier to lug medium sized spkrs than move the Emitter around, believe it or not!) It wasn't a matter of which speakers to use.

To be clear about this, my experience is of an exquisitely made amplifier in the very top class of commercially available products -- but one that I maybe wished to be the end all and it wasn't in my case.
So please don;t be mislead by what I say: the latest unknown, best kept secret in hi-fi "giant killer amp" will be trashed by it.
Or that the "great little amp" at 50% of the price will outperform it. It won't.

But it seemed to play music as if it were solving a mathematical equation... if this makes sense.

And no, it wasn't a matter of the mains (direct line and ridiculously large power supply anyway) nor the power chord (exceptionally mine had huge hard-wire mains cables). Nor the IC -- I used my trusty \Valhalla and my own brew based on Jadem's own design (Jade cable),

For example, the Dart Stereo you see in Mike's system above has an incomparably more "liquid" sound in my system while retaining the dynamic impact we need in classical (in lower volumes, however).

gregm

Mike:
when i find (...)someone to help me
Well, Mr A. Porter's name comes to mind... now arm-twisting wouldn't work in tis case (he needs arms to take the pictures)...:)

gregm

Enviable system, indeed! Also a useful point of reference for me as I, too, seek neutrality (& pitch...)...

I assume you had to tweak the output impendance of the Placette to match w/ the Tenors when playing the Linn?

gregm